NTC Thermistors Product Index
	Standard Disc Style Thermistors are available either coated or uncoated and are available in a variety of resistance values, curves and tolerances to suit a wide variety of applications.		Coated Chip Style Very fast response time , -50ºC to 150ºC operation , Epoxy or phenolic resin coatings , Values from 100 Ω to 1 Meg Ω , Bare or insulated lead wires , Time Constant: 10 sec. (max.) , Dissipation Factor:1 mW/ºC (nom.)
	Glass Encapsulated Style Low Cost, High Reliability , High Temperature Operation (up to 300ºC) , Glass to Metal Hermetic Seal , Values from 2kΩ to 1 MegΩ , Tin or Gold Plated Dumet leads (solderable and weldable) , Time Constant: 8 sec. (nom.) , Dissipation Factor: 2mW/ºC (nom.)		Radial Leaded Glass Encapsulated The thermistors are glass encapsulated to allow for operation in a wide array of environments including high humidity and rapid thermal cycling. The small size allows the sensor to react quickly to small temperature changes.
	Surge Current Limiter These specially formulated NTC Thermistors have an initial high resistance that can limit current surge for up to several seconds. During this time, the heat generated within the device causes the resistance to decrease to a very low level.	NTC Technical Notes Application Notes Engineering Notes